ORICOM DTX4200X AND ANU1100 DUAL RECEIVE IP54 ULTIMATE 4X4 TOURING PACK

The Ultimate 4×4 Touring Pack pairs the new and improved DTX4200X Dual Receive UHF CB Radio with the popular ANU1100 All Terrain Antenna. The DTX4200X uses Oricom’s unique DUAL RECEIVE feature. It’s just like having two radios in one. This allows you to receive and listen to two different channels simultaneously. So if you’re talking to your mates on channel 64 and you are monitoring the highway channel on 40 you will be able to receive both transmissions at the same time, so you don’t miss an important conversation.

BUILT LOUDER
The audio quality and volume has been significantly enhanced to provide Loud & Clear sound from the speakers in both the transceiver and microphone.

BUILT LARGER
Professional grade microphone has been redesigned to be heavier and larger in the hand, with an extra-large easy to read LCD display.

BUILT TO LAST
Designed for Australian conditions and backed by our 5 year warranty.

FEATURES

DTX4200X
Ergonomic, professional grade controller speaker microphone
IP54 Dust and splash resistant
Loud and clear audio with a speaker in the microphone and the transceiver
Easy to see extra large backlit display
Intuitive jog wheel to access primary functions
Heavy duty die-cast metal chassis
3 memory groups of 16 channels per group
Large 96 multi-colour backlit display
Back light brightness (5 pre-set levels plus auto)
Fast scanning 80 channels within 3 seconds
Jog wheel volume/channel and squelch control
Duplex
38 CTCSS & 104 DCS codes
Transmit power indicator
Slide-in mounting bracket
Auto power off (off/1h/2h/4h)
3.5mm external jack (for optional external speaker)
Included in the pack; 2m microphone extension cable and mounting hardware
Transceiver Dimensions (31mm x 128mm x 147mm)

ANU1100 ANTENNA
3dBi UHF CB Antenna with heavy duty custom spring base (length 430mm)
600mm Fiberglass extension whip to convert antenna to a 1m* 6.5dBi high gain antenna
Coaxial cable (4.5m)
Includes grub screw and hex key to secure the fiberglass pole
Transceiver Dimensions (31mm x 128mm x 147mm)
*Length of antenna includes spring base

SPECS
Compliance AS/NZS 4365:2011
Frequency Range TX/RX: 476.425 - 477.4125 MHz
Number of TX/RX Channels 80 UHF CB Channels (75 voice)
Channel Spacing TX/RX 12.5KHz
Operating modes Simplex, Repeater TX offset (+750KHz)
Scanning Speed 50 msec per channel
Antenna Impedance 50 Ohms
Operating Volts nominal 13.8VDC
Operating Volts Range 10 to 15VDC
Over Voltage Protection Diode and Voltage regulator system
Over Current Protection 2 AMP fuse
Reverse Polarity Protection Shunt diode
Frequency stability +/- 5 ppm

TRANSMITTER
RF Output Power 5 Watts max
Modulation F3E(FM)
Maximum deviation 2.5KHz
Spurious Emissions < -30dBm
TX Audio pre-emphasis + 6dB/Octave from 300Hz to 3KHz
Current consumption during TX 1.7 AMP with 50 ohm antenna termination

RECEIVER
Circuit Type Dual conversion super heterodyne
Intermediate Frequencies 1st IF : 21.4MHz,
2nd IF : 450KHz for Main RX
1st IF : 38.85MHz,
2nd IF : 455KHz for Sub RX
Receiver sensitivity -123dBm for 12dB SINAD
Audio output power > 2 Watts at 8 ohm load
RX Audio de-emphasis + 6dB/Octave from 300Hz to 3KHz
Signal to Noise Ratio > 40dB
Conducted Spurious Emission > -57dBm